NDT Personnel Qualification and Inspector Certification: ISO 9712, SNT-TC-1A and What the Letters Really Mean

Inspector profiles are full of letters: CSWIP, AWS, PCN, ASNT, API, NACE. A proposal with a long list looks reassuring, but the letters do not all mean the same thing. Some certify a person’s knowledge of welding inspection, some qualify a person to perform and interpret a specific NDT method, and some are issued by an employer rather than by an independent body.

This guide explains how NDT personnel certification works, in particular the difference between central certification under ISO 9712 and employer-based certification under SNT-TC-1A, and what a buyer should check before accepting a certificate. The aim is not to rank schemes, but to help you read them correctly, because the wrong reading is a common cause of disputes on projects in Indonesia.

Three Kinds of Paper

When an inspector presents a document, it falls into one of three categories. The first is a training record, showing that a person attended a course or passed an exam. The second is a certification, which is a formal attestation of competence issued under a defined scheme. The third is an authorization, in which an employer allows a certified person to carry out defined tasks.

These are different things. ASNT makes the point in its own guidance that a course completion record or exam result is not a certification. A buyer who accepts a training certificate as proof of qualification may be accepting something that no scheme recognizes.

Understanding the category tells you what to ask next. For a certification, ask who issued it and under what scheme. For an authorization, ask for the employer’s written rules. For a training record, ask what certification follows it, and whether it has been achieved.

Central Certification and ISO 9712

In central certification, an independent certification body examines and certifies individuals, and the certificate is not tied to any single employer. ISO 9712 is the international standard that sets requirements for the qualification and certification of personnel who perform industrial NDT. According to ISO, the current edition is the fifth, published in December 2021, replacing the 2012 version.

The standard covers ten methods, including magnetic, penetrant, radiographic, ultrasonic and visual testing, and it is written for third-party conformity assessment. That is the core of the idea: someone other than the employer or the individual decides whether the person meets the requirements, which gives clients an independent basis for accepting the result.

Central schemes also exist outside ISO 9712. ASNT operates its own central program, which it describes as accredited under ISO 17024, and certificates from it can only be issued by ASNT. When a contract names a central scheme, check that the certificate is from that body or an equivalent one that the contract accepts.

Employer-Based Certification and the Written Practice

Employer-based certification works differently. Under the approach described by ASNT for SNT-TC-1A, the employer certifies its own NDT personnel, and ASNT does not issue those certificates. The employer, with its own Level III, writes a procedure called a written practice that describes how it trains, qualifies and certifies people at each level.

SNT-TC-1A is a recommended practice, and its advisory language becomes mandatory in the employer’s written practice, which the employer adjusts and adds to. In other words, the real rules sit in the employer’s document. Two companies that both say “SNT-TC-1A” can have different requirements, so the written practice is the thing to examine.

This has a direct consequence for buyers. An employer-based certificate is the employer’s responsibility and should reference its written practice. Ask to see that practice, the name of the responsible Level III and the records behind the certificate, such as training hours, experience, examination results and eyesight tests. A certificate that cites only the recommended practice and no employer document is incomplete.

Levels I, II and III

Both families of schemes use levels to describe responsibility. In general terms, Level I personnel perform specific tests under supervision, Level II personnel set up and calibrate equipment, perform tests, interpret results against codes and report them, and Level III personnel have broad responsibility for the method, including writing procedures and overseeing others.

For a typical project, the person who signs an inspection report should be Level II or above in the method concerned. A Level I operator may carry out the test, but the interpretation and acceptance decision should come from someone with the appropriate level, as defined in the contract and the applicable scheme.

Level III is often overlooked. A project that relies on employer-based certification depends on the Level III of the employer to keep the written practice, procedures and examinations in order. If the employer has no real Level III in the method, the system behind the certificates is weak, however many technicians hold them.

Welding Inspector and Sector Schemes

Many of the letters on an inspector’s business card belong to another family altogether. Welding inspector schemes such as CSWIP and AWS certify knowledge of welding processes, procedures, defects and inspection, and they are widely requested for welding inspection roles. They are not the same as NDT method certification, though some inspectors hold both.

Sector schemes add another dimension. API certifications relate to particular equipment and inspection areas, while NACE certifications, now part of AMPP, relate to corrosion and coating inspection. PCN is a central scheme for NDT personnel administered by the British Institute of NDT, and ASNT offers both its central program and the SNT-TC-1A practice.

G.I Quality Services lists several of these among the certifications held by its inspectors, including CSWIP, AWS, PCN, ASNT, DS-1, API, NACE, PROSIO and Comp Ex. For any provider, the useful move is the same: match each certification to the task it covers, and ask for the certificate of the individual who will do the work.

Verifying a Certificate in Five Minutes

A short routine catches most problems. For each named inspector, check the following:

  • Issuer: Who issued the certificate, and is the body one the contract accepts?
  • Scheme: Is it central certification or an employer’s certificate, and is the written practice available?
  • Method and level: Does the certificate cover the method and level required for the task?
  • Scope: Are there limits on sector, product or technique that matter for your job?
  • Validity: What are the issue and expiry dates, and is revalidation recorded?
  • Vision: Are current eyesight test records available where the scheme requires them?
  • Identity: Does the certificate carry a number, a photograph or another identifier that matches the person?

Where an issuing body publishes a register of certified people, use it. If it does not, ask the provider for a copy of the original certificate and a letter from the Level III or certification body where there is doubt. A few minutes of checking before mobilization is far cheaper than a rejected report afterwards.

Common Pitfalls on Projects

A frequent pitfall is the certificate that matches the person but not the job. A Level II in magnetic particle testing is not qualified to interpret radiographs, and a welding inspector certificate does not authorize anyone to perform ultrasonic tests. The contract should say which method and level are needed for each activity.

Another is the sub-contracted crew. NDT is often performed by specialist companies hired by the fabricator, and their personnel may hold employer-based certificates under written practices that the buyer has never seen. Establish at the start how sub-contractors will be vetted and who will check their paperwork.

Finally, there is the expired or incomplete certificate. Dates, eyesight records and revalidation steps are easy to overlook. A calm, early verification at the kick-off meeting, rather than a dispute at the final report, protects the schedule. If the contract also recognizes national schemes alongside international ones, agree in advance how equivalence will be judged.

Frequently Asked Questions

What is the difference between ISO 9712 and SNT-TC-1A?

ISO 9712 is a standard for the qualification and certification of NDT personnel through third-party certification. SNT-TC-1A is a recommended practice that employers use to write their own written practice and certify their own personnel.

Is an SNT-TC-1A certificate issued by ASNT?

No. Under the employer-based approach, the employer certifies its personnel under its written practice, and ASNT does not issue those certificates. ASNT issues only its own central certificates.

What does NDT Level II mean?

In general terms, Level II personnel can set up and calibrate equipment, perform the test, interpret results against the applicable code and report them. The exact definition depends on the scheme or written practice.

Is a welding inspector certificate the same as NDT certification?

No. Welding inspector schemes certify knowledge of welding and its inspection, while NDT certification qualifies a person to perform and interpret a specific method. Some inspectors hold both, but each should be checked against the task.

What should I ask for to verify an inspector’s qualifications?

Ask for the certificate, the issuing body or written practice, the method and level, the expiry date and, where required, current eyesight records. For employer-based certificates, also ask to see the written practice.

Are training certificates enough to start work?

No. A course completion or exam result is not a certification. Certification is a formal attestation under a defined scheme, and it should be in place before the person performs or signs off tests.

0 0 reviews
Rate this